Structured Cabling Audit · Physical Infrastructure Assessment · Sydney & Nationwide

Structured Cabling Audit Sydney. Evidence-based. Delivered on live networks.

Someone else did the install? The Site Takeover Check checks it was finished. A$495 ex GST in Sydney, up to 2 hours on site, and a site report and quote for anything else within 48 hours. Bigger sites are audited from A$495 to your scope of works, with us on site within 5 business days of your request.

Physical layer infrastructure audit across Sydney and Australia. Structured cabling audit, fibre loss testing, LAN audit, network compliance testing, and brownfield risk assessment — on live networks, without disruption. ACRS registered. Telstra Partner since 1992.

Cabling Audit  ·  Fibre Loss Testing  ·  LAN Audit  ·  AS/CA S009  ·  Wi-Fi Validation  ·  Cellular Survey  ·  Nationwide
Why Layer 1 Gets Missed

Every network project assumes the physical layer is ready. Most aren't.

SD-WAN deployments, cloud migrations, Wi-Fi refreshes, and in-building cellular projects all share one assumption: that the physical infrastructure beneath them is fit for purpose. That assumption is rarely tested. The cabling was installed years ago. The OTDR records were never kept. The LAN documentation hasn't been updated since the last contractor touched it — and it's not unusual for an audit to turn up a switch nobody on the current team even knew was there.

Layer 1 is the physical foundation your network runs on — the copper cabling, fibre links, patch panels, connectors, and pathways beneath every switch, AP, and application. A Layer 1 network audit treats that infrastructure as what it actually is: a risk surface. Not a commodity. Not a given. Every copper run, every fibre link, every patch panel, every cellular coverage gap, every Wi-Fi dead zone is a potential failure point. The audit finds them before they become downtime.

On one 133-link Cat 6A office in Macquarie Park this October, 18 links (13.5%) failed. 14 had a broken cable shield, 2 failed crosstalk or return loss and 2 were open circuit. No visual check finds a broken shield. A Layer 1 audit reveals what assumption hides. The same principle applies to WAN circuits — two carriers, two handoffs, diverse routes on paper — until you trace the physical paths and find both converge in the same trench. Route diversity verification is part of every physical layer risk assessment we deliver.

Common finding
Copper failing certification
Cat6 runs that passed original certification now failing under 10GBase-T or high-density PoE load — after years of brownfield changes no one documented.
Common finding
Fibre faults invisible to the eye
Connector loss, bend radius violations, and splice faults that only OTDR testing reveals — misdiagnosed for months as switch or ISP problems.
Common finding
No as-built records
Years of moves, additions, and changes by multiple contractors. No documentation. No idea what's actually running until something breaks.
Common finding
Cellular and Wi-Fi gaps
Dead zones in the exact spaces where connectivity has operational or safety consequences — that nobody mapped because nobody looked.
🏅
13.5%
Links failed18 of 133 Cat 6A links on one Macquarie Park office we tested in October 2026.
🔒
Live
On live networksAudit and remediation without disrupting operations.
🌏
33+
Years on live networksTesting and certifying live networks since 1992. Sydney and nationwide.
Site Takeover Check

What we do on site

Up to 2 hours on site, checking the scope of works against what is actually installed.

A check of every enclosure, with before and after photos.

Simple fixes made on the day: clear it out, label the leads, tie and dress the loops.

What you get

A site report within 48 hours of the visit, with photos, findings, the fixes made on the day, and each further item with a photo and description.

A quote for any further work within 48 hours of the visit, scoped to your scope of works.

The A$495 is not credited against follow-on work.

See the Site Takeover Check: A$495 ex GST

Larger audits are quoted from A$495 ex GST, depending on the scope of works, the size of the site and whether it is done in hours or after hours.

Something failing rather than unfinished? Find the Fault, triage and report: A$495 ex GST. We come to site within 48 hours, fix what we can on the day to relieve the immediate problem, and send a written report with photos within 48 hours of the visit.

On at least 4 in 10 jobs we are called into, gaps are found that need rework. For fibre, see Fibre testing and splicing in Sydney.

Copper failing its test? See how two failing Cat6A cables traced back to a join in the ceiling.

When You Need a Layer 1 Audit

Nine situations that call for a structured cabling audit.

Before an SD-WAN deployment

SD-WAN underperforms when the LAN underlay is undocumented or degraded. Audit first. Deploy with confidence.

Before a cloud migration

Cloud connectivity depends on the physical edge. Validating Layer 1 before migration prevents post-cutover surprises.

After an acquisition or fit-out

Inherited infrastructure with no documentation. A cabling audit establishes what's there, what's fit for purpose, and what needs to go. Taking over a single site? Start with a Site Takeover Check: A$495 ex GST, site report and quote within 48 hours of the visit.

Recurring unexplained outages

Intermittent faults being misattributed to software, switches, or the ISP. The real cause is usually physical layer degradation.

Before a Wi-Fi or cellular refresh

New APs and DAS on degraded cabling infrastructure will underperform. Validate the physical foundation before the overlay.

Compliance and risk reporting

Network compliance testing against AS/CA S009 with documentation suitable for risk registers, audits, and board reporting.

Hospital and health network procurement

NSW Health and LHD procurement requires documented evidence that infrastructure is fit for purpose. A Layer 1 audit delivers that evidence.

Multi-site standardisation

Distributed branch networks with inconsistent physical layer standards. Audit establishes a baseline. Remediation standardises it.

Pre-sale due diligence

Infrastructure audit as part of property or business sale. Know the state of the physical network before the transaction closes.

Book an Audit

Not sure where your physical layer — cabling, fibre, and infrastructure — stands?
We'll tell you — before it fails.

A Layer 1 network audit identifies risk before it becomes downtime. We work on live networks, document everything, and deliver an actionable remediation plan — not a sales pitch.

What We Audit

Structured cabling and network audit. Every layer of it.

Copper cabling, fibre optic links, LAN infrastructure, in-building cellular coverage, and enterprise Wi-Fi — all audited against current standards and real operational load.

Structured Cabling Audit

Full audit of copper cabling infrastructure — Cat6, Cat6A, and legacy runs. Every cable tested with calibrated certification tools against AS/CA S009. Patch panel audit included. Port schedules documented. Faults identified and prioritised for remediation.

Cat6/6AAS/CA S009Patch panel auditCertification

Fibre Loss and Length Test

Loss and length testing on every fibre link. It shows which links meet their loss budget and which need rework, which visual inspection cannot find. Printed test results provided. Every fibre link pass/fail documented on handover. Fibre testing and splicing in Sydney.

Fibre loss testingInsertion lossLength

LAN Infrastructure Audit

LAN audit across switching, rack infrastructure, cable management, and documentation. Shadow IT identified and removed. Device inventory produced. LAN topology mapped. Gap analysis against current and planned technology requirements delivered in the audit report.

LAN audit SydneySwitch inventoryShadow ITTopology mapping

In-Building Cellular Survey

RF survey measuring 4G and 5G signal strength across all frequency bands and all Australian carriers. Dead zones mapped. Building materials and layout documented. RSRP and SINR measured per zone. Coverage gaps identified against operational requirements.

RSRP mappingSINR analysisAll carriersDead zone mapping

Wi-Fi RF Validation

Heatmap survey of the live Wi-Fi environment. Signal strength, SNR, and data rates measured across all frequency bands. Spectrum analysis for non-Wi-Fi interference. Coverage gaps and capacity bottlenecks identified under real operational load — not empty-room assumptions.

Heatmap surveySpectrum analysisInterference mappingCapacity testing

Network Compliance Testing & Reporting

Structured audit report with findings prioritised by risk, compliance gap analysis against AS/CA S009 and your technology requirements, and an actionable remediation plan scoped to evidence. Suitable for risk registers, board reporting, and procurement requirements.

Compliance reportRisk registerRemediation planAS/CA S009
Audit Deliverables

What you receive on handover.

✓
Structured audit reportFindings documented by zone with risk priority ratings and photographic evidence.
✓
Copper certification recordsPass/fail results per run against AS/CA S009. Every tested cable documented.
✓
Fibre test resultsPrinted loss and length results for every fibre link tested.
✓
Updated as-built drawingsPhysical infrastructure mapped as-found. Labelling and port schedules updated — not a spreadsheet that says one thing while the network does another.
✓
RF and heatmap outputsCellular and Wi-Fi coverage mapped per zone. Dead zones and interference sources identified.
✓
Actionable remediation planEvidence-based scope of works. Prioritised by risk. Not a sales pitch for wholesale replacement.
How We Work

Evidence first. Remediate only what the data demands.

We do not replace infrastructure to justify a project. Every finding is tested, documented, and prioritised by risk. Scope is evidence-based. Always.

01

Scope & Site Walkdown

We establish your environment, technology stack, and risk priorities before any testing begins. Full walkdown of pathways, racks, patch panels, cable runs, and wireless coverage areas. It also covers checking cabinet fit before a switch refresh, so replacement hardware is measured against the cabinet before it's ordered.

02

Physical Testing

Copper certification with calibrated tools. Loss and length test on every fibre link. RF survey for cellular and Wi-Fi. LAN topology mapped. All testing conducted on the live network — no outages.

03

Audit Report & Risk Assessment

Findings compiled into a structured audit report. Issues prioritised by impact and risk. Compliance gap analysis against AS/CA S009 and your current technology requirements.

04

Remediation Plan & Handover

Evidence-based remediation plan scoped to what actually limits performance. As-built drawings, certification records, and fibre test results handed over. Your team inherits evidence — not assumptions. That includes patch panel strain relief and cabinet security, the mechanical faults that don't show up in a test report.

Partnership
Telstra Partner since 1992. Cabling, Wi-Fi and in-building 4G/5G, installed, tested and documented.Finalist, Telstra Partner Awards 2026, Operational Excellence
Layer 1 Network Audit Sydney

Not sure where your physical layer — cabling, fibre, and infrastructure — stands?
We'll tell you — before it fails.

A Layer 1 audit identifies risk before it becomes downtime. Live networks. Full documentation. An actionable plan — not a sales pitch.

Book an Audit See Our Work
Making critical connectivity work - end to end.